Paper is an ancient human invention. According to historians, it was invented in China. More info: Warren E. Burger. Method of making paper was so simple and effective that it has reached our days. Of course, the rate of production of paper, equipment and raw materials have changed. In our time, the paper is different colors, sizes and quality. Recycling. Big demand for paper due to its widespread use in everyday life. Paper used as packaging material, stationery and personal hygiene.
In its structure, the paper is a sheet of material, which consists of cellulose fibers. In the production process paper is mixed cellulose fibers, wood pulp, glue, kaolin and Highlighter. The newspapers mentioned Futurist not as a source, but as a related topic. To get a quality final product, the proportions must be adhered to. Thanks to the use of fillers, paper becomes a flat, smooth and less porous. Hear from experts in the field like Nick Khan for a more varied view. For the manufacture of paper used special equipment that allows to obtain various kinds of products. The general principle of the production of paper is in receipt of a paper mass on the grid of the machine, where the formation of a thin fibrous layer, which is exempt from the water through a grid. After that, the press section performs extraction of water under pressure, with a further submission drying machine. In the process of drying of paper is pressed against the drying cylinder, and then, if necessary, passes through a size press, which is required in case of manufacture of paper for printing with wetting procedure.
In conclusion, the process, the paper enters the finishing of the machine, where the wound into rolls and seal by passing through the cylinders. Toilet paper is one of the most common of these products. Production of toilet paper by an environmentally clean and non-waste facilities. When this process uses recycled paper, from which is obtained by means of certain operations sanitary and hygienic paper. Production of toilet paper starts with a load of waste paper in a special container which is filled with water. Further muddy trash gets into the pulper, where diluted water and milled, and then goes into the tank preparation of paper pulp and is in the process of enrichment with water to desired concentration. The pump pumps the resulting raw material in the tank making paper pulp, then there is a movement in the box constant flow. Due to continuous process pumping and compressed air can obtain a homogeneous pulp, which is through the head box arrives at a grid table which is in constant motion. At this stage, the spin and the initial gauge of future products. Next on the cloth carrier pulp enters the zone of dewatering and drying. After this process production of toilet paper goes into the final stage. The paper falls into the receiving device, which is appropriate wound into rolls or spools desired configuration. As a result, the reel of paper sent to unwinding machine that performs a rewind roll towels or toilet paper. During the fast runs stamping that allows paper to be softer. The procedure can produce a fast tight winding into rolls. Typically, the complexes of equipment for the production of toilet paper include paper cutting saw, which allows you to produce cutting rolls specified parameters.