Thus, when tamping the way two people can shpalopodboykami to work with 2.4 or 6 jacks. Rams set to shpalnye boxes in pairs under each rail through 8 … 10 boxes. In the course of the rear pair of jacks consistently rearranged in 8 … 10 shpalnyh boxes next to the front of work (Detail the technology of production of various types of track works, using jacks and other MPI, including hydraulic, described in the applicable legislation, such as instructions for the current maintenance of railway track. – Moscow: Transport, 2000 1 Regulation and implementation of the basic technology works with the current contents of the path.
– Moscow: Transport, 1998. 2). Rihtovschiki with manual transmission and the executive motor rihtovschikov placed near the rail (the side opposite to the direction of the desired slight shift) so that the double-hinged arm and shovel were placed under his soles. If the surface of the ballast is contained in a good state, then the installation is not required to align rihtovschika ballast and remove it from the rail in shpalnom box. The executive bodies of both manual and motorized rihtovschikov set at an optimal angle to the horizon (defined almost as a function of the track panel weight, degree of compaction of ballast, the quantities required Sdvizhkov way, the number used in set viewed by rihtovschikov, etc.), so that does not support slip in ballast and not unduly raised her path (25 mm).