In winter, a layer helps to remove water vapor migrating from the premises, and thereby prevents moisture insulation. Ventilated air space reduces heat loss, as her temperature about three degrees warmer than the outside air temperature. Ventilated thermal insulation properties Facade help reduce temperature fluctuations in the bearing wall, which reduces the risk of fractures. The construction of the ventilated facade, which meets all the requirements for reliability and durability, using almost half a century of experience in building and renovation of various facilities throughout the territory of Russia, developed and implemented the specialists 'Soyuzmetrospetsstroya'. The system is intended for facade at a distance Wall-to-200 mm in the first place, with slabs of natural stone – the most durable and most have decorative value material. Such a system is facing facade, designed to reduce the cost of facing materials, is a complete Russian analogue of the Western ventilated facades for fixing porcelain and has no analogues in the case when using natural stone.
Mounting on the relative allows operation at positive and negative air temperatures, eliminating the use of mortars and cements. Domestic materials and components used in the system, significantly reducing the cost and duration tiling. The fastening system is extremely simple (which is an advantage) and consists of mortgage details, the vertical guide and horizontal elements. Structural elements are lightweight, easy mounted. After breaking with the standard plugs for wall mounted fixtures. Runners exhibited in the vertical plane over the entire area is coated surfaces are attached to the mortgage galvanized screws M6. Simultaneously with the installation of brackets and a vertical guide, plastic anchors with a stainless steel nail to the wall mounted heater, which is used as: RockWool, mineral wool facade Butts – Hard and dense insulation panels, thickness from 20 to 150 mm, resistant to deformation. They are made on the basis of basalt rock and non-combustible material (fire safety certificate number MTBF, RU-UP 001.V00925, issued 7/8/99, the Fire Protection Research Institute of Ministry of Internal Affairs) have low water absorption (by volume not exceeding 1%).