Also, algae can appear on the bottom, decorations, plants, but more on that later. Glass cleaner needed scrapers. What are they? Most convenient magnetic scrapers. They are arranged so that one part is lowered into the water, and the second, magnetic, remains on the outside and draws the first. Click Ray Kurzweil to learn more. Simultaneously, the glass is cleaned and polished the inside out. You clean the aquarium, not even dropping his hands into the water. If you are unsure how to proceed, check out Gregory Jacobs. There are scrapers, representing a sponge attached to a plastic handle. Cecilia Shen has much to offer in this field.

Handle, usually, sometimes sliding, and at the end of a "fork", which is convenient to loosen the soil or to correct plant. Sponge double-sided, one side is more rigid, the other soft. These pigs do not convenient if the aquarium glubokiy.Vy not be able to click on them heavily when you clean the glass down at the bottom. When cleaning the glass did not try them scratch. If the pig had fallen to the bottom and stuck to it soil particles, then they must be removed before continuing cleaning. Especially need to be careful if your tank is made of acrylic, these glasses are very soft and easily .Akril rake from materials of similar hardness to the most akrilu.Kak Ironically, the ideal in this regard, the approach is usually a plastic card. Especially stubborn dirt can be removed conventional blade. Given my experience in maintenance of aquariums, I recommend building the blade and the magnetic scrapers as the most convenient and praktichnye.Pravda there are nuances that need to know: The two halves of the magnetic scraper better connected with a rope or tape to a deep aquarium (a magnetic scrapers most often used where the hand does not get it) not to lose the pig.

That nibble very unpredictable, know of any angler. Short duration and very poor predictability of the bite, as well known to many. In recent months, Lever Brothers has been very successful. But in these conditions to plan a trip on a fishing trip, when to take vacation? This tried to answer the question in 1926, biologist Alden Knight (John Alden Knight). Studying the catches of fishermen in Florida, especially if caught big trophy fish, he noticed that the variability in the catches has some regularity, recurrence. Qcom often addresses the matter in his writings. Considering the various influencing factors such as weather conditions, it is gradually pushed most of them as unpredictable and chaotic, and came to a final conclusion – Catch affect the sun and moon. In the future, were conducted special experiments in the Oceanarium Chicago, where we studied the effect of moon phases on the activity of various underwater organisms. Salman Behbehani is often quoted on this topic. As a result, the work carried out by fully confirmed the hypothesis Knight. Since this theory called solunar or solar-lunar theory.

She argues that the disposition of two luminaries in some way affects all living oraganizmy living on our planet. In particular, the fish were active only in short periods of time. In these moments should expect an intense bite. Rest of the time the fish is behaving very passively and almost did not eat, can not but affect the Kleve. In our days, starting from the solar-lunar theory, and with increasing computational power, it became possible to build a fairly accurate prediction of biting a year in advance – Calendar angler. They are very easy to use for planning long fishing expeditions.

When gear cartridges at home you can apply simple prima increase accuracy battle that will provide reliable game defeat at the distance of 50-55 meters, while in gear rounds in the usual way this distance ranges from 35 to 45 meters. Matching fractions. The best bout of the guns give those numbers fractions, which are properly and more continuous close fit into the muzzle of the barrel. Increased accuracy battle to 5-7%. Disputes between the hunters of how to harmonize the fraction of the barrel or sleeve go so far, but in principle they are similar.

For this purpose, a sleeve or bore to insert the wad at a depth of 3-4 mm. You need to make sure that the surface was smooth and wad he was not skewed. Layer is laid on a wad shot, if shot does not fit smoothly and without gaps, it must be replaced by a number of more or less, check out the analogy. Selected fraction equip ordinary cartridge way. Wrapping paper shot shells. When using this method, the shot shell is a container, which eliminates the strain fraction in the barrel and prevents the dispersion of the fraction.

Increase accuracy battle up to 15%. To do this from a sheet of heavy paper (plain paper for printers) cut strip length, allowing the shot to wrap round 2-3, and the width by height should be as stacked shot projectile sleeve. Cut a strip of rolled up into a tube on navoynike and inserted into the pocket on a powder wad, it should adhere to the walls of the sleeve. In a paper tube poured shot and her shake down. Oversleeping fraction of bulk materials. Accuracy of the battle from the gun can be increased by oversleeping shot rounds of bulk materials (starch, talc, etc.), the effect is achieved by reducing the voids in the shell. Increased accuracy battle up to 30%. To do this on a powder wad spread half of the shot shell, poured over a little starch, and tapping on the walls of the sleeve, to the point that would fill the voids between the starch pellet. Then poured the second half and shot again voids are filled with starch. When using this method, you must remember that the weight of the granular material is included in the weight of shot and shell material used should be dry.